TESTO 560i - Establishing a Bluetooth connection

7 First steps
10
Switching on Testo Smart Valve
✓
Do not switch on Testo Smart Valve until all hoses have been
attached and the installation is ready for charging.
1
Press the ON key.

The instrument switches on and is in Bluetooth
®
connection mode.
In Bluetooth
®
connection mode, connection can be established to the
testo Smart App or to a testo 550s or testo 557s manifold.
2
Press and hold the ON key.

The instrument is switched off.
7.3 Establishing a Bluetooth
®
connection
✓
The testo 560i scale or the testo Smart Valve are switched on.
7.3.1 Establishing a Bluetooth
®
connection to the
testo Smart App
To establish a connection via Bluetooth
®
, you need a tablet or
smartphone with the Testo Smart App already installed on it.
You can obtain the app for iOS devices from the App
Store, for Android devices from the Play Store or by
scanning the QR code in the manifold.
Compatibility:
Requires iOS 12.0 or later/Android 6.0 or later, requires Bluetooth
®
4.0.
1
Open Testo Smart App.

The app automatically searches for Bluetooth® devices in the vicinity.
2
In the Bluetooth menu, check whether the required instrument is
connected.

If necessary, switch the instrument to be connected off and on again
to restart the connection mode.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com