TESTO 570 Series - Page 22

7 Using the product
22

The Measuring Mode menu is
displayed.
3
Press [▲] / [▼] to select Evacuation and press [Menu/Enter] to
confirm.

The Configure Target Lines menu is
displayed.
4
Adjust the Target Line value
4.1
Press the [▲] key and in the Evacuation Target field, select Manual
Input.
4.2
Press [Menu/Enter] to confirm.

The field is activated.
4.3
Press [▲] / [▼] to set the value.
4.4
Press [Menu/Enter] to confirm.
5
Adjust the Maximum Decay Target value.