TESTO 570 Series - Page 23

7 Using the product
23
5.1
Press the [▼] key and in the
Maximum Decay Target field, select
Manual Input.
5.2
Press [Menu/Enter] to confirm.

The field is activated.
5.3
Press [▲] / [▼] to set the value.
5.4
Press [Menu/Enter] to confirm.
6
Confirm the entries in steps 4 and 5:
Press [▼] to select OK and press [Menu/Enter] to confirm.

A connection is established with available Bluetooth
®
probes.

testo 552i is switched on and connected automatically.