5 First steps
20
5 First steps
5.1. Commissioning
5.1.1. Connecting the rechargeable battery
1. Open battery compartment cover (1).
2. Slide rechargeable battery (2) fully into the battery compartment
until it clicks into place.
-
T
h
e
i
m
a
g
e
r
s
- The imager starts automatically.
3. Close the battery compartment cover.
5.1.2. Performing basic settings
> Flip open the display and remove the protective film.
- The start screen appears on the display.
- When you first switch on the imager: the Country settings and
Set time/date dialogue boxes are opened one after the other to
set the instrument language, temperature unit (°C/°F) and
time/date.
Touchscreen operation
✓ The Country settings dialogue box is opened.
1. Touch the required language. If necessary, scroll with
/
to display other languages.
- The activated language is indicated with a tick.
To Next Page
Loading...
