5 First steps
30
5.2.11. Automatically focusing the image
> Activate auto-focus: | .
- - is displayed and is highlighted orange.
> Touch [Trigger button].
- The image is automatically focussed. The area to be focussed
must be inside the orange box, which is shown by touching the
trigger button.
5.2.12. Recording (freezing/saving) an image
1. Press the [Trigger button].
- The image is frozen (still).
If you want to save the image, touch to select where you want
to save it to, see Image gallery, page 46.
2. Save image: press [Trigger button] again or touch
.
- The IR image is saved and the real image is automatically
attached to the IR image.
> Do not save image: press [Esc].
To Next Page
Loading...
