4 Product description
20
Illustration in this document
To carry out the basic settings, examples of both methods of
operation are given, describing all steps, see Performing basic
settings, page 21.
The other chapters only deal with functions/buttons that have to be
activated:
• Touchscreen operation: touch with a fingertip.
• Joystick operation: select first (move joystick up/down/right/left),
then activate (press joystick).
4.2. Basic properties
4.2.1. Power supply
The power is supplied to the instrument via a replaceable
rechargeable battery or via the mains unit provided.
With an attached mains unit, power is supplied automatically via
the mains unit and the instrument's rechargeable battery is charged
(only at ambient temperatures from 0 to 40°C).
Under high ambient temperatures a longer charging time
may be required.
Charging the battery is also possible using a desktop charging
station (accessory: 0554 8851).
The instrument is equipped with a buffer battery to maintain the
system data during an interruption in the power supply (e.g. when
the battery is changed).
4.2.2. File formats and file names
All saved images consist of an IR image and the attached real
image.
The images are saved according to the following pattern:
XXyyyyyy.zzz
XX: IR for all single images (standard), ST for a package including
several single images (recorded with the image stitching wizard).
yyyyyy: 6-digit sequential number.
zzz: bmt for all images (Testo-specific file extension).
To Next Page
Loading...
Need help?
General
