6 Using the product
36
6.2. Menu functions
6.2.1. Measurement
Measurement range
The measurement range can be set to adapt to the respective area
of application. If measurement range 3 is selected (high-
temperature measurement range), the aperture in the lens is
automatically reduced to protect the detector against damage.
CAUTION
Detector may be damaged!
> If measurement range 1 and 2 are set: do not point the imager
at objects with temperatures above 550°C (1022°F).
> If measurement range 3 is set: do not point the imager at
objects with temperatures above 1400°C (2552°F).
Task Actions/description
Set the measurement
range.
>
| | Measurement |
Measurement range | or
or
.
Pixel mark | Hotspot
Hotspot mark (crosshairs with maximum measurement value
displayed) can be shown.
Task Actions/description
Show/hide hotspot mark.
> | .
or
>
| | Measurement | Pixel
mark | Hotspot.
To Next Page
Loading...
