7 Maintaining the product
64
7 Maintaining the product
Changing the rechargeable battery
1. Open battery compartment cover (1).
2. Press red lock release button (2).
- The rechargeable battery is released and sticks out a little from
the battery compartment.
3. Pull the rechargeable battery out of the battery compartment.
4. Slide rechargeable battery fully into the battery compartment
until it clicks into place.
- The imager starts automatically.
5. Close the battery compartment cover.
Cleaning the display
> Clean the display when dirty with a cleaning cloth (e.g.
microfibre cloth).
Clean thermal imager
> If the housing of the thermal imager is dirty, clean it with a damp
cloth. Do not use any aggressive cleaning agents or solvents!
Weak household cleaning agents and soap suds may be used.
Cleaning lens protection glass
> Large dust particles can be removed with a clean optical
cleaning brush (available in specialized photography shops).
> Use a lens cleaning cloth for slight contamination. Do not use
rubbing alcohol!
To Next Page
Loading...
