5 First steps
23
3. Move [●] left/up to select
.
4. Press [●] to change the unit.
- The activated unit is shown on the top right of the display.
5. Move [●] down to select
.
6. Press [●] to activate the selection.
- The Set time/date dialogue box is opened.
- The top button
is selected.
7. Press [●] to open the Time input screen.
8. Move [●] up/down to set the values for Hour and Minute. To
toggle between the parameters, move [●] left/right.
9. Move [●] left to select
.
10. Press [●] to activate the selection and close the input screen.
11. Move [●] down to select the bottom button .
12. Press [●] to open the Date input screen.
13. Move [●] up/down to set the values for Day, Month and Year.
To toggle between the parameters, move [●] left/right.
14. Move [●] left to select
.
15. Press [●] to activate the selection and close the input screen.
16. Move [●] left to select .
17. Press [●] to activate the selection and close the input screen.
> Hold down [ ] to close the imager.
To Next Page
Loading...
