6 Using the product
41
Atmospheric correction
Measurement deviations arising due to high humidity or large
distances to the object to be measured can be corrected.
Correction parameters must be entered for this.
If the imager is connected to an optional radio humidity probe (only
testo 890-2), the ambient temperature and humidity are transferred
automatically. For connection to a radio humidity probe, Further
information is available under Radio (only testo 890-2), page 56..
Task Actions/description
Open Atmospheric
correction input screen.
> | | Measurement |
Atmospheric correction.
Activate atmospheric
correction.
>
Active.
> To deactivate, touch the button
again.
Manually set the values
for the ambient
temperature
(Temperature), ambient
humidity (Humidity) and
distance between the
imager and the object to
be measured (Distance
to subject).
>
, .
Apply entries.
> .
To Next Page
Loading...
