6 Using the product
54
Task Actions/description
Set the language of the
program interface.
> Highlight the language to be used
by touching on it.
Change temperature unit.
> .
- The activated unit is shown on the
top right of the display.
Apply entries.
> .
Super-resolution (optional)
SuperResolution is a technology to improve image quality. Each
time an image is recorded, a sequence of images is saved on the
thermal imager and used to calculate a higher-resolution image
with the aid of the PC software (no interpolation). The pixel count
increases by a factor of 4, while the geometric resolution (IFOV) is
improved by a factor of 1.6.
To use the function, the imager must be hand-held (no tripod).
This function is available as an additional option (article
no. 0554 7806) and must be activated before it can be
used, if the option was not ordered at the same time as
the imager.
Activate function (only with subsequent order):
You will receive an envelope with an access code
(identification code), which you should enter on the
website www.testo.com/upgrade.
When all necessary data has been entered, an
activation code is generated and can be used to
activate the function via the IRSoft PC software. Please
observe the installation requirements and steps on the
website or in the email sent to you.
To Next Page
Loading...
Need help?
General
