6 Using the product
102
Designation Description
[Insert into new
group]
Creates a new alarm group, with
a distinction between alarm, warning and
trend alarm group.
A trend alarm is used to monitor
temporal changes or the stability
of measurement parameters.
The change in the measurement
parameter is determined over four
measurement cycles and
projected onto the change per
hour.
To this end an alarm is useful
unless the absolute value of the
measurement parameter is
supposed to be within specified
limits, but rapid changes must be
avoided.
[Move to] Move components/channel to another
alarm group.
[Remove from
group]
Removes the components/channel from
the specified alarm group.
[Delete this group]
Deletes the entire alarm group.
[Apply to all] Applies an alarm group to all
components/channels.
Channel list List of the available channels and their
affiliation to the selected alarm group.
To Next Page
Loading...
