Tevo TORNADO - Letter from TEVO

- 3 -
Leer from TEVO
Dear Customer,
Thank you for purchasing the TEVO Tarantula 3D printer.
This guide will step you through the assembly and the first run of the printer. If you have any
problems during assembly, please go to our Facebook group:
https://www.facebook.com/groups/TEVO.3dprinter.owners/
If you cannot resolve your problem there, do not hesitate to contact us through the website
http://support.tevoprinter.com/
Please make sure that the frame is completely square and tight in every angle by using a
gemmetrical triangle or any other more sophisticated square tools (not supplied with the printer
kit.)
Regards,
TEVO Team