Texas Instruments BA II Plus User Guide

12 Overview of Calculator Operations
Memory Operations
Clearing Memory
Clearing memory before you begin a new calculation is a critical step in
avoiding errors.
• To clear an individual memory, store a zero value in it.
• To clear all 10 calculator memories, press & { & z.
Storing to Memory
To store a displayed value to memory, press D and a numeric key (0–9).
• The displayed value replaces any previous value stored in the
memory.
• The Constant Memory feature retains all stored values when you
turn off the calculator.
Recalling From Memory
To recall a number stored in memory, press J and a numeric key (0–9).
Note: The recalled number remains in memory.
Memory Examples
Memory Arithmetic
Using memory arithmetic, you can perform a calculation with a stored
value and store the result with a single operation.
You can store values in any of 10 memories using the
standard calculator keys.
Note: You can also use the Memory worksheet. (See
“Memory Worksheet
” on page 80.)
• You can store in memory any numeric value within the
range of the calculator.
• To access a memory M0 through M9, press a numeric
key (0 through 9).
To Pre s s
Clear memory 4 (by storing a zero value in it)
0 D 4
Store 14.95 in memory 3 (M3) 14.95 D 3
Recall a value from memory 7 (M7) J 7

Texas Instruments BA II Plus Specifications

General

Type	Financial
Cover	-
Form factor	Pocket
Control type	Buttons
Product color	Black
Digits	10 digits
Display tilting	No
Display number of lines	1 lines
Memory registers	10
Power source	Battery