Texas Instruments CC253x Software Developers Guide

Host Error Codes www.ti.com
160
SWRU271H–October 2010–Revised April 2019
Submit Documentation Feedback
Copyright © 2010–2019, Texas Instruments Incorporated
HCI Extension API
G.3 Host Error Codes
This section lists the various possible error codes generated by the host. An HCI extension command may
respond with a command status of SUCCESS. If an error is detected during subsequent processing of that
command, the relevant error code is reported in the command complete event.
The error code 0x00 means SUCCESS. The possible range of failure error codes is 0x01 to 0xFF. The
following table provides an error code description for each failure error code.
Table G-1. Host Error Codes
Value Parameter Description
0x00 SUCCESS
0x01 FAILURE
0x02 INVALIDPARAMETER
0x03 INVALID_TASK
0x04 MSG_BUFFER_NOT_AVAIL
0x05 INVALID_MSG_POINTER
0x06 INVALID_EVENT_ID
0x07 INVALID_INTERRUPT_ID
0x08 NO_TIMER_AVAIL
0x09 NV_ITEM_UNINIT
0x0A NV_OPER_FAILED
0x0B INVALID_MEM_SIZE
0x0C NV_BAD_ITEM_LEN
0x10 bleNotReady
0x11 bleAlreadyInRequestedMode
0x12 bleIncorrectMode
0x13 bleMemAllocError
0x14 bleNotConnected
0x15 bleNoResources
0x16 blePending
0x17 bleTimeout
0x18 bleInvalidRange
0x19 bleLinkEncrypted
0x1A bleProcedureComplete
0x30 bleGAPUserCanceled
0x31 bleGAPConnNotAcceptable
0x32 bleGAPBondRejected
0x40 bleInvalidPDU
0x41 bleInsufficientAuthen
0x42 bleInsufficientEncrypt
0x43 bleInsufficientKeySize
0xFF INVALID_TASK_ID

Texas Instruments CC253x Specifications

General

Brand	Texas Instruments
Model	CC253x
Category	Microcontrollers
Language	English