Texas Instruments TI-83-Plus User Guide

TI-83 Plus GeoMaster™ Application Page 63
Storing and Clearing Data
Use the
Select Data
and
Clear Data
tools on the
MISC
menu to
work with data gathered using the tools on the
MEAS
menu.
Tip
•
To select the MISC menu, press
V
.
•
If the GeoMaster™ menu bar is not displayed, press
V
.
•
Press
s
to exit the menu item that is currently selected.
You can store up to six different values or measurements to lists
at one time. Each list can contain up to 999 elements. The
GeoMaster application automatically creates lists named
L1GEO
,
L2GEO
,
L3GEO
,
L4GEO
,
L5GEO
, and
L6GEO
. The numbers or
measurements you select on the screen are stored in these lists
with the first element selected stored to
L1GEO
, the second
element stored to
L2GEO
, etc.
Note
•
You may not be able to store the maximum number of
elements in each of the six lists if your calculator does not have
a sufficient amount of RAM.
•
Each coordinate pair is treated as two separate data elements.
Therefore, you can only store three coordinate pairs at one
time.

Texas Instruments TI-83-Plus Specifications

General

Brand	Texas Instruments
Model	TI-83-Plus
Category	Calculator
Language	English