Texas Instruments TI-83-Plus User Guide

TI-83 Plus GeoMaster™ Application Page 72
Moving Multiple Objects
1. Draw two or more objects
.
2. Press
s
to exit the current tool.
3. Move the cursor to the first object, and then press
¯
.
The object changes to dashed lines.
4. Move the cursor to the second object, and then press
\
¯
. The object changes to dashed lines.
5. Select additional objects by moving the cursor to each object
and pressing
\ ¯
.
6. With the cursor on a selected object, press
¯
again to
activate the move mode. An x-shaped cursor is displayed.
7. Use the arrow keys to move the group of objects.
Tip
Everything on the screen that is associated with the objects is
moved with it, including transformations and labels.
8. Press
¯
to place the objects in their new location. The
normal cursor returns.

Texas Instruments TI-83-Plus Specifications

General

Brand	Texas Instruments
Model	TI-83-Plus
Category	Calculator
Language	English