TI-83 Plus GeoMaster™ Application Page 75
Showing Hidden Objects
1. Select
Hide/Show
from the
MISC
menu. Any hidden objects
are displayed with dashed lines.
2. Move the cursor to an object you want to show, and then
press
¯
. The object is displayed with solid lines.
Equ/Plot Off
If you have turned on equations in the Y= editor or have turned
stat plots on, you can turn them off again without exiting the
GeoMaster™ application by selecting
Equ/Plot Off
from the
MISC
menu. By default, equations and stat plots are turned off when
you start the application.
Turning Trails On and Of
To turn trails on or off, select
Trails On/Off
from the
MISC
menu.
Trails are either turned on or off, depending on the previous
Trails On/Off selection. By default, trails are turned off when you
start the application.
To Next Page
Loading...
