Texas Instruments TI-83-Plus User Guide

TI-83 Plus GeoMaster™ Application Page 77
Selecting an Individual or Multiple Objects
To select an individual object, place the cursor on the object, and
then press
¯
.
To select multiple objects do one of the following:
1. With the cursor in an empty area, press
\ ¯
to enable
multiple object selection.
2. Move the cursor to each object, and then press
¯
.
3. To disable multiple object selection, press
s
.
-or-
1. Press
¯
to select the first object.
2. Press
\ ¯
to select subsequent objects.
3. To disable multiple object selection, press
s
.

Texas Instruments TI-83-Plus Specifications

General

Display Type	LCD
Display Resolution	96 x 64 pixels
Power Source	4 AAA batteries
Programming Language	TI-BASIC, Z80 Assembly
Backup Power	CR1616 or CR1620 lithium battery
RAM	24 KB
Processor	Zilog Z80
Weight	7.4 oz (210 g) with batteries
Dimensions	7.3 x 3.5 x 0.9 inches