Texas Instruments ti nspire cx Guide Book

66 Working in a TI-Nspire™ CX Navigator™ Teacher Software Classroom
Lock in OFF position.
2. To attach the handheld, face the screen upward and slide the handheld onto the
top of the cradle. Be sure that both sides of the handheld are inserted into both of
the side guides.
3. Press firmly to make a good connection. When properly connected, the handheld
appears to be sitting on top of the cradle.
4. Lock the handheld in place by sliding the lock on the back of the cradle to the ON
position.

Texas Instruments ti nspire cx Specifications

General

Power	Rechargeable lithium-ion battery
Operating System	TI-Nspire OS
Programming Support	TI-Basic, Lua
Display	320 x 240 pixel color display (3.2 inch diagonal)
Connectivity	USB
Memory	100 MB storage memory
Processor	150 MHz ARM9
Dimensions	7.5 x 3.4 x 0.8 inches
Graphing Capabilities	3D graphing