Lock in ON position.
Connecting to the TI-Nspire™ CX Navigator™ System
To connect to the TI-Nspire™ CX Navigator™ network, you must log in to the network
from your handheld. Before you can log in, the teacher must complete the following
tasks:
• Start a class session on their computer.
• Provide you with the class network name, a username and, if necessary, a
password.
Note: Use this method to log in to the network if the operating system on the handheld
is version 3.2 or higher.
Logging in to the Network
1. Attach a wireless adapter or wireless cradle to the handheld.
2. Ensure your TI-Nspire™ handheld is ready for login. (The icon is blinking.)
3. Complete one of the following actions:
• From the Home screen, press 5 5.
• From an open document, press ~ 8.
The Login to Class dialog box opens and the last network that was associated with
the wireless client appears.
Working in a TI-Nspire™ CX Navigator™ Teacher Software Classroom 67
To Next Page
Loading...
