Texas Instruments ti nspire cx Guide Book

Connecting Handhelds and Transferring Files
This chapter describes how to connect one TI-Nspire™ CX handheld to another, how to
connect handhelds to a computer, and how to transfer files between them.
The TI-Nspire™ handhelds have a USB port that enables connectivity with another
TI-Nspire™ handheld or with a computer.
Connecting Handhelds
Using USB Cables
You can use USB cables to connect two TI-Nspire™ handhelds, to connect a TI-Nspire™
handheld to a computer, or to connect one TI-Nspire™ handheld using TI-Nspire™ TI-84
Plus keypad to another.
TI-Nspire™ USB connection cable to connect
handheld to a computer.
TI-Nspire™ handheld mini-USB cable to
connect two TI-Nspire™ handhelds.
Connecting Two TI-Nspire™ Handhelds with the Mini-USB Cable
You can connect two handhelds as long as both handhelds are using the same keypad.
You cannot connect a handheld using the TI-Nspire™ TI-84 Plus keypad to a handheld
using the native TI-Nspire™ keypad.
The TI-Nspire™ handheld USB port is located
in the center on the top of the TI-Nspire™
handheld.
Connecting Handhelds and Transferring Files 83

Texas Instruments ti nspire cx Specifications

General

Brand	Texas Instruments
Model	ti nspire cx
Category	Calculator
Language	English