Texas Instruments Tiva TM4C123GH6PM - Page 252

UART
ROM Location:
ROM_APITABLE is an array of pointers located at 0x0100.0010.
ROM_UARTTABLE is an array of pointers located at ROM_APITABLE[1].
ROM_UART9BitDisable is a function pointer located at ROM_UARTTABLE[34].
Parameters:
ui32Base is the base address of the UART port.
Description:
This function disables the 9-bit operational mode of the UART.
Returns:
None.
22.2.1.4 ROM_UART9BitEnable
Enables 9-bit mode on the specified UART.
Prototype:
void
ROM_UART9BitEnable(uint32_t ui32Base)
ROM Location:
ROM_APITABLE is an array of pointers located at 0x0100.0010.
ROM_UARTTABLE is an array of pointers located at ROM_APITABLE[1].
ROM_UART9BitEnable is a function pointer located at ROM_UARTTABLE[33].
Parameters:
ui32Base is the base address of the UART port.
Description:
This function enables the 9-bit operational mode of the UART.
Returns:
None.
22.2.1.5 ROM_UARTBreakCtl
Causes a BREAK to be sent.
Prototype:
void
ROM_UARTBreakCtl(uint32_t ui32Base,
bool bBreakState)
ROM Location:
ROM_APITABLE is an array of pointers located at 0x0100.0010.
ROM_UARTTABLE is an array of pointers located at ROM_APITABLE[1].
ROM_UARTBreakCtl is a function pointer located at ROM_UARTTABLE[16].
Parameters:
ui32Base is the base address of the UART port.
252 April 8, 2013