Texi Tronic 7 NF User Manual

TEXI Tronic 7 NF operation manual
3. Adjusting the height of the knee lifter
Warning: Turn OFF the power before starting the work as to prevent accident caused by abrupt start of the
sewing machine.
1. The standard height of the presser foot lifted is 10 mm.
2. You can adjust the presser foot lift up to 15 mm using
knee lifter adjust screw (1).
Caution: Do not operate the sewing machine when the presser
foot (3) is lifter 10 mm or more, since the needle bar (2) will be
get contact with the presser foot (3).
4. Installing the thread stand
1. Assemble the thread stand unit, and insert it in the
hole in the machine table.
2. Tighten lockout (1) to fix the thread stand.
3. For ceiling wiring, pass the power cord through spool
rest rod (2).
4

Texi Tronic 7 NF Specifications

General

Brand	Texi
Model	Tronic 7 NF
Category	Sewing Machine
Language	English