BHT-206A/B-SERIES-MM-1
5-00-00
30 APR 2013 Rev. 14 Page 87
Export Classification C, ECCN EAR99
5-26. 300-HOUR AIRFRAME PROGRESSIVE INSPECTION — EVENT NO. 6
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
DATE: __________________W.O. _____________________
FACILITY: __________________________________________
HELICOPTER S/N: ___________________________________
REGISTRY NO.: _____________________________________
TOTAL TIME:_______________________________________
SIGNATURE:________________________________________
ZONE 9 — AFT FUSELAGE
PLACARDS AND MARKINGS
Chapter 11 1. Examine the placards, decals, and markings. Make sure
they are readable, correctly applied, and in agreement with the
applicable configuration of your helicopter.
FUSELAGE (EXTERIOR)
Chapter 53 1. Examine aft fuselage for dents, cracks, corrosion,
delamination, loose or missing rivets, and condition.
2. Examine aft fuselage for indications of fuel or oil leaks.
Chapter 28 3. Examine the fuel cap for condition and security.
Chapter 96 4. Examine the grounding plug for condition.
5. Examine aft crosstube support tunnel structure for cracks,
corrosion, distortion, and loose fasteners.
Chapter 6 and
Chapter 53
6. Examine all fuselage drains for condition and freedom from
obstructions.
Applicable Service
Instruction
7. Examine heater and/or air conditioning inlets and outlets
for cleanliness and absence of obstructions, if installed.
To Next Page
Loading...
Need help?
General
