BHT-206A/B-SERIES-MM-1
5-00-00
Export Classification C, ECCN EAR99
5-42. 1500 HOURS OF COMPONENT OPERATION AND EVERY 50 HOURS THEREAFTER
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
DATE: __________________W.O. _____________________
FACILITY: __________________________________________
HELICOPTER S/N: ___________________________________
REGISTRY NO.: _____________________________________
TOTAL TIME:_______________________________________
SIGNATURE:________________________________________
Chapter 62,
ASB 206-93-74
SWASHPLATE SUPPORT (206-010-452-001, -005, AND
-109)
If windy conditions prevail, secure blades with
tie-down to prevent excessive main rotor flapping.
1. Thoroughly clean swashplate support base area with
drycleaning solvent (C-304) to remove all dirt, grease, and oil
residue, then wipe dry. Visually inspect full circumference of fillet
radius for cracks with a 10X magnifying glass. Pay particular
attention to aft side of swashplate support assembly.
2. If after accomplishment of step 1 a crack is suspected,
carry out further inspection by dye penetrant inspection method
(BHT-ALL-SPM, Chapter 6). Paint finish may be removed as
required in suspected area.
30 APR 2013 Rev. 14 Page 137/138
To Next Page
Loading...
Need help?
General
