BHT-206A/B-SERIES-MM-1
5-00-00
Export Classification C, ECCN EAR99
FREEWHEEL ASSEMBLY
Chapter 63 1. Remove freewheel assembly.
BHT-206A/B/L-Series-
CR&O, Chapter 63
2. Disassemble the freewheel assembly to the extent
necessary to perform a visual inspection of the clutch assembly,
inner shaft, and outer shaft. It is not necessary to remove the
thrust bearing from the outer shaft. Remove all sealant and
clean all parts. The stripping of paint is not required.
3. Visually inspect clutch assembly, inner and outer race shaft
assemblies, and bearings for serviceability.
4. Assemble freewheel assembly.
Chapter 63 5. Install freewheel assembly.
5-41. 1500 HOURS OF COMPONENT OPERATION (CONT)
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
30 APR 2013 Rev. 14 Page 135/136
To Next Page
Loading...