BHT-206A/B-SERIES-MM-1
5-00-00
30 APR 2013 Rev. 14 Page 109
Export Classification C, ECCN EAR99
5-32. WEEKLY INSPECTION
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
DATE: __________________W.O. _____________________
FACILITY: __________________________________________
HELICOPTER S/N: ___________________________________
REGISTRY NO.: _____________________________________
TOTAL TIME:_______________________________________
SIGNATURE:________________________________________
Chapter 62 and
Chapter 64
MAIN ROTOR HUB AND BLADES, AND TAIL ROTOR HUB
AND BLADES
The following procedures shall be accomplished as
frequently as deemed necessary when operating in
rain, corrosive salt laden air, or other adverse
environmental conditions.
The following preventive maintenance procedures for the main
rotor hub and blades and tail rotor hub and blades are
recommended to prevent corrosion and extend their life.
The inspection may be accomplished more frequently or may be
extended beyond the weekly interval, as deemed necessary,
based on the actual operating environment.
1. Wipe hub and blades with drycleaning solvent (C-304).
2. Wash hub and blades with mild cleaning compound
(C-318). Rinse with water and dry with clean cloths.
3. Inspect hub and blades for evidence of corrosion.
To Next Page
Loading...
Need help?
General
