BHT-206A/B-SERIES-MM-1
5-00-00
30 APR 2013 Rev. 14 Page 201
Export Classification C, ECCN EAR99
COMPONENT OVERHAUL SCHEDULE
5-41. COMPONENT OVERHAUL SCHEDULE
The Component Overhaul Schedule (Ta b le 5 - 5 )
provides the time interval between overhaul for each
applicable helicopter component.
DO NOT APPLY TOLERANCES TO
PARTS WITH A LIMITED
AIRWORTHINESS LIFE (CHAPTER 4).
DO NOT EXCEED RETIREMENT LIFE
FOR CRITICAL COMPONENTS. REFER
TO AIRWORTHINESS LIMITATIONS
SCHEDULE (CHAPTER 4).
SOME PARTS INSTALLED AS ORIGINAL
EQUIPMENT ON MILITARY
HELICOPTERS MAY HAVE A LOWER
AIRWORTHINESS LIFE AND/OR
OVERHAUL SCHEDULE THAN WHEN
USED ON A COMMERCIAL
HELICOPTER. CONSEQUENTLY, PARTS
THAT HAVE BEEN USED ON MILITARY
HELICOPTERS SHOULD NOT BE USED
ON COMMERCIAL HELICOPTERS.
OVERHAUL SCHEDULE FOR SOME KIT
COMPONENTS AND/OR PARTS IS NOT
COVERED IN THIS SCHEDULE. REFER
TO APPLICABLE SERVICE
INSTRUCTIONS FOR KIT COMPONENTS
SCHEDULE.
Refer to paragraph 6 for information on
inspection and overhaul tolerance.
Neither assignment of a time period for
overhaul of a component or failure to
assign a time period for overhaul of
component constitutes warranty of any
kind. The only warranty applicable to
helicopter and any component is the
warranty included in Purchase Agreement
for helicopter or component.
The overhaul interval specified for any given part
number contained in this Component Overhaul
Schedule applies to all successive dash numbers (or
suffixes) for that item, unless otherwise specified.
To Next Page
Loading...
Need help?
General
