BHT-206A/B-SERIES-MM-1
5-00-00
Page 32 Rev. 14 30 APR 2013
Export Classification C, ECCN EAR99
e. Lower collective stick full down.
f. Position N
2
governor actuator to full DECREASE
(extended).
g. Verify for clearance between governor stop and lever
stop arm.
Chapter 71 h. Verify control linkage for excessive looseness, lost
motion, and binding.
DRIVETRAIN
Chapter 63 1. Examine freewheel assembly for condition, leaks, and
security.
Chapter 63
Chapter 96
2. Examine the freewheel unit chip detector for accumulated
material.
Chapter 65 3. Examine forward short shaft (steel) disc pack couplings for
condition and security.
4. Examine forward short shaft (steel) splined adapters for
adequate lubrication and freedom of movement.
5. Torque check forward short shaft disc pack coupling
fasteners 50 to 70 inch-pounds (5.7 to 7.9 Nm).
Chapter 96 ELECTRICAL
1. Examine all electrical components, wires, cables, and
connectors in the power plant area for chafing, general
condition, and security.
2. Verify illumination of airframe fuel filter caution light, if
installed, by depressing differential switch “press to test” button
on filter head.
5-17. 100-HOUR AIRFRAME PROGRESSIVE INSPECTION — EVENT NO. 2 (CONT)
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER