BHT-206A/B-SERIES-MM-1
5-00-00
Page 48 Rev. 14 30 APR 2013
Export Classification C, ECCN EAR99
2. Examine skid shoes for condition and security.
3. Examine skid tube saddles for corrosion, damage, and
security.
4. Examine ground handling wheel attachment bolts for
condition and security.
GROUND RUN
GROUND RUN OF HELICOPTER TO BE
ACCOMPLISHED BY QUALIFIED PERSONNEL
ONLY.
Chapter 12 1. Make sure applicable servicing requirements have been
carried out.
2. Check oil level of transmission, hydraulic tank, engine, and
tail rotor gearbox prior to running helicopter.
3. Make sure that helicopter is ready for ground run and that
surrounding area is clear.
BHT-206A-FM-1,
BHT-206B-FM-1,
BHT-206B3-FM-1
4. Start the helicopter and conduct ground run at 100% N
R
to
check for leaks, and ensure all systems are operational, and
parameters are within Flight Manual limitations.
Chapter 96 5. Check the voltage regulator setting. Adjust as required.
6. Shut down the helicopter.
5-19. 100-HOUR AIRFRAME PROGRESSIVE INSPECTION — EVENT NO. 4 (CONT)
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
To Next Page
Loading...
Need help?
General
