EasyManua.ls Logo

Textron Jacobsen Ransomes Parkway 3 Meteor LGNN344 - Windrowing

Textron Jacobsen Ransomes Parkway 3 Meteor LGNN344
236 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
en-110
12 QUALITY OF CUT
12.7 WINDROWING ______________________________________________________
NOTE: Arrow indicates direction of travel.
Windrowing is the deposit of clippings concentrated
at one end of cutting unit(s) or between two cutting
units, forming a line in the direction of travel.
Probable Cause Remedy
Grass is too tall. Reduce speed to allow material to clear. Increase
Height of cut.
Mowing while grass is wet. Mow when grass is dry.
Grass built up on roller(s). Clean roller(s) and scraper(s).
High levels of thatch. Increase Height of Cut.
TN0225

Table of Contents

Related product manuals