en-96
9 ADJUSTMENTS
9.12.3 BACKREST EXTENSION * **___________________________________________
The backrest extension can be individually adjusted by
pulling it upwards or pushing it downwards over the
various locking increments up the end stop.
To remove the backrest extension, pull it upwards over
the end stop.
* If Fitted
** Optional Extra
9.12.4 SEAT HEATER * ** ___________________________________________________
The seat heater can be turned on/off by pressing the
switch.
0 = seat heater OFF
I = seat heater ON
* If Fitted
** Optional Extra
9.12.5 LUMBAR SUPPORT__________________________________________________
The lumbar support increases both the seating comfort
and the performance of the driver.
By turning the adjustment knob upwards, the curvature
in the upper part of the backrest cushion can be
adjusted. By turning the knob downwards, the curvature
in the lower part of the backrest cushion can be
adjusted.
0 = No curvature
1 = Max. curvature at the top
2 = Max. curvature at the bottom
To Next Page
Loading...
