Textron Jacobsen Ransomes Parkway 3 Meteor LGNN344 - Cutting Cylinder and Roll Bearings; Grass Deflector Adjustment

en-92
9 ADJUSTMENTS
9.7 CUTTING CYLINDER BEARINGS ________________________________________
The cutting cylinder bearings are self adjusting taper roller bearings and require no adjustments.
9.8 FRONT AND REAR ROLL BEARINGS _____________________________________
The roll bearings are self adjusting taper roller bearings and require no adjustment
9.9 GRASS DEFLECTOR___________________________________________________
The grass deflector can be positioned by hand as it is ‘friction clamped’ by nuts (tightening the nuts will increase
the clamping effect).