en-45
6 CONTROLS
6.2J.3 START UP SLOPE WARNING SCREEN __________________________________
When the ignition switch is turned to crank one of the following screens
will be shown.
If the machine is fitted with the slope monitoring system the screen will
display the logo “TST™” (Tilt Sensor Technology) and maximum
working slope symbol. On the left hand side of the screen the glow plug
symbol and a count down will be shown to indicate the time left before
the engine will automatically crank.
If the machine is not fitted with the slope monitoring system TST™ the
screen will display the logo crossed out and maximum working slope
symbol. On the left hand side of the screen the glow plug symbol and a
count down will be shown to indicate the time left before the engine will
automatically crank.
To Next Page
Loading...
