13SHB MPE850 Rev F | 408014 | 408090 | 408101 | 408246 |
3.5 Coolant
3 Description
3.5 Coolant
Engine models I2 846 MAR NA-80 TC-80 TC-100 TC-120 TC-155
Coolant additive Coolant additive based on ethylene glycol, silicate- and nitrite- free,
suitable for aluminium engines.
Suggested coolant additives NOTICE! Insufficient cooling due to incompatibilities of coolant.
Combining different coolant additives may trigger a chemical reaction
and they may lose their effectiveness. The suggested coolant additives
are laboratory tested for compatibility. If you use another coolant
additive verify the compatibility previously.
– BASF Glysantin G 30
– Chevron Havoline Extended Life Coolant XLC+B
– Valvoline Zerex G 30
Mixing ratio NOTICE! An incorrect mixing ratio reduces the cooling capacity. When
topping up the coolant, do not change the mixing ratio. Use the same
coolant throughout the year in the mixing ratio specified.
50 % water + 50 % coolant additive
Fill quantity Approximately 2,75 liters [2.9 qt (US)]
To Next Page
Loading...
