51SHB MPE850 Rev F | 408014 | 408090 | 408101 | 408246 |
2
1
8.3 Changing engine oil and oil filter
Information! The engine oil will be pumped out in two stages. First as much as possible engine oil
will be pumped out from the oil tank. The remaining engine oil will be pumped out with the suction pump in
the dry sump.
CAUTION! Scalding caused by hot engine oil.
Wear protective gloves.
► Unscrew the oil dipstick
2
from the oil
tank.
8 Service tasks in the workshop
8.3 Changing engine oil and oil filter
► Warm up the engine. (See chapter 4.2
Operation during the break-in period.)
► Turn off the engine.
► Remove the engine cover
1
.
To Next Page
Loading...
