Textron MPE 850 MARINE - 8.10 Checking flame arrester

81SHB MPE850 Rev F | 408014 | 408090 | 408101 | 408246 |
3
2
1
4
8 Service tasks in the workshop
8.10 Checking flame arrester
8.10 Checking flame arrester
► Open the hose clamp
4
.
Cleaning flame arrester
► Open the clamp
3
.
The clamp built in by the engine manufacturer
in these place is destroyed during removal. After
removing the clamp must be replaced by a hose
clamp.
► Remove the hose
2
.
Engine models I2 846 MAR
TC-80, TC-100, TC-120 and TC-155
► Check the flame arrester
1
.
The fabric must be visible.
► If the fabric is no longer visible, follow
instructions in Cleaning flame arrestor
section.