25SHB MPE850 Rev F | 408014 | 408090 | 408101 | 408246 |
3 Description
3.10 Supported vehicle equipment
Light Description
Temperature warning light If the temperature warning light is flashing or illuminating, the engine
temperature has almost been reached the critical temperature range.
Further information can be found in chapter 3.7 Protective functions.
The temperature warning light is illuminating.
► Flush the sea water cooling circuit. (See chapter 4.3.6 Flushing
sea water cooling circuit.)
► Sediments or leaks in the sea water cooling circuit can cause the
fault. Immediately inspect the cause and repair possible faults by
a qualified workshop. All Textron Motors authorized workshops
are qualified to repair your engine.
The temperature warning light is flashing.
► Check the coolant level. (See chapter 4.3.2 Checking coolant
level.)
NOTICE! Engine damage caused by overheating. An empty expansion
tank may be an indication of a leaking cooling system. Immediately
inspect the cause and repair possible faults by a qualified workshop.
All Textron Motors authorized workshops are qualified to repair your
engine.
► If the expansion tank is empty, turn off the engine immediately.
► If the coolant level is significantly below the MIN-marking, let the
engine cool down and refill coolant.
► If the coolant level is right, adapt the way you operate. Check the
coolant level again after the engine has cooled down.
To Next Page
Loading...
