Textron MPE 850 MARINE - Page 54

54 SHB MPE850 Rev F | 408014 | 408090 | 408101 | 408246 |
15
16
19
20
18
17
11
12
13
14
► Connect the hose
18
with the oil tank.
► Close the hose clamp
17
.
Tightening torque:
3 Nm +0,5 Nm [2.2 lbf ft +0.4 lbf ft]
► Connect the hose
16
to the oil tank.
► Close the hose clamp
15
.
Tightening torque:
5 Nm +0,5 Nm [3.7 lbf ft +0.4 lbf ft]
Replacing oil filter
► Hold the oil filter
19
.
► Unscrew the banjo bolt
20
.
► Remove the oil filter.
8 Service tasks in the workshop
8.3 Changing engine oil and oil filter
► Open the hose clamps
11
and
13
.
► Hold the hoses
12
and
14
over a drain
tray. Extend hoses if necessary.
► Actuate the starter.
The engine cranks and the engine oil will be
pumped out of the engine.