MANUAL P/N 900000165 REV H
all time/date values are in BCD.
Alarm connections
Label Activity Remarks
power closed Power is supplied to the NTP80
open Power is off
status closed System is operating normally
open System is not operating normally
sync closed Unit has loaded and serving time
open Unit has not loaded
4.5 100 BASE T Ports
Three independent Ethernet ports are available for interfacing into your network and use
standard Ethernet RJ45 connections. The unit is also configured and monitored via a web GUI
through a network connection.
4.6 Power Connection
The AC mains connector is suitable for 90-240V AC at 50/60Hz.
To Next Page
Loading...