TFS NTP80plus - 13 Appendix B: MIB File; TFS-NTPCOMMON-Mib.mib

MANUAL P/N 900000165 REV H
49
13 Appendix B: MIB File
The MIB files for the NTP80plus and NTP80plus are listed here. There are three MIB files that define the NTP80plus
enterprise MIB:
13.1 TFS-NTPCOMMON-MIB.mib
--*********************************************************************--
-- TFS Enterprise MIB --
-- --
-- for s/w 0123NT-X --
-- --
-- v7.00 Rationalisation of TFS mibs for all products. --
-- Initial specific common MIB for NTP80plus. -- --
--
--*********************************************************************--
TFS DEFINITIONS ::= BEGIN
IMPORTS
enterprises
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
TRAP-TYPE
FROM RFC-1215;
tfs OBJECT IDENTIFIER ::= {enterprises 10784}
common OBJECT IDENTIFIER ::= {tfs 3}
servertype OBJECT-TYPE
SYNTAX INTEGER
{ ntp8 (1),
tfdNTP (2),
tfdATM (3),
tfdSCCAM (4),
m21xETH (5),
m21xATM (6),
ntpDISP (7),
NTP80plus (8),
ptp80 (9),
ptp8 (10)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "Indicates type of unit and hence its functionality"
::= {common 1}
modelNo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
ACCESS read-only
STATUS mandatory
DESCRIPTION "Model number"
::= {common 2}
serialnumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..5))
ACCESS read-only
STATUS mandatory
DESCRIPTION "Internal serial number of unit"
::= {common 3}