MANUAL P/N 900000165 REV H
11 Specifications
Model Number: NTP80Plus (Rackmount Version)
Size: 19” Rack Mounting, 1U High, 200mm Deep
1.5kg typical
Power: 90-264V AC, 47-63Hz, Load 20W
Synchronisation
Source: GPS , GPS+GLONASS, GPS+BEIDOU, GLONASS, BEIDOU
Input Level: +11dB to +35dB
Synchronisation Accuracy: ± 100 nanoseconds from UTC with Signal availability.
(Assuming adequate satellite visibility)
1PPS Output
Connection: 50 BNC socket
Output: 1 pulse per second upon synchronisation.
Level: TTL
Edge: Positive
Accuracy: ±2 microseconds from UTC with Signal availability.
(Assuming adequate satellite visibility). Accuracy stated
after 30 minutes from synchronisation.
Network Connection
Connection: 3 x RJ45 connection to a 100B0ASE-T network.
Interface Standards: NTP Version 2 (RFC 1119)
NTP Version 3 [RFC 1305]
NTP Version 4 (RFC5905)
SNTP (RFC 2030)
SNMP v1, v2 Enterprise MIB (RFC1155, RFC1157, RFC1213)
Daytime Protocol (RFC867), Time Protocol (RFC 868)
Ethernet/IEEE802.3
UDP/IP
ICMP
Configuration: Network parameters configured via web browser or front
panel display and rocker switch
User Port
Connection: 9 way D type socket
Characteristics: 115.2baud, no parity, 8 bit characters and 1 stop bit
To Next Page
Loading...