MANUAL P/N 900000165 REV H
Satellites’ visibility has been reduced through new building structures, or the new
installation of other equipment above the antenna.
Q How many Clients may I connect to one NTP80plus Time Server?
A The NTP80plus can handle up to 512 packets per second, which equates to a theoretical
512 x 64 (32,000+) clients assuming standard NTP operation. We do however recommend
not exceeding 1000 clients as good practise in designing NTP networks. If more clients are
used in heavy traffic then not all packets will be answered.
Q I am not using the Time & Frequency Solutions Network Management System and using a
third party software package. Where can I obtain the SNMP trap information?
A See Appendix B for the SNMP MIBS for the NTP80plus.
To Next Page
Loading...