TFT Tornado RC Instructions For Installation, Operation And Maintenance

©Copyright Task Force Tips LLC 2008-2021 6 LIY-300 January 13, 2021 Rev18
3.3 OPERATING ENVELOPE
Nozzle A flows 250 gpm (950 l/min), at 100 psi (7 bar), K factor = 25
Nozzle B flows 500 gpm (1900 l/min), at 100 PSI (7 bar), K factor = 50
Nozzle C flows 750 gpm (2900 l/min), at 100 PSI (7 bar), K factor = 75
Figure 3.3A
Nozzle A flows 250 gpm (1900 l/min), at 100 psi (7 bar), K factor = 25
Nozzle A flows 500 gpm (1900 l/min), at 100 psi (7 bar), K factor = 50
Nozzle B flows 750 gpm (2900 l/min), at 100 PSI (7 bar), K factor = 75
Figure 3.3B
WARNING
Damage or injury could result from operating the monitor beyond the safe operating envelope. Do
not operate the monitor outside the envelope in the following graph(s).
Tornado Operating Envelope
Flow (gpm)
Monitor Inlet Pressure (psi)
Flow (lpm)
Monitor Inlet Pressure (bar)
0
25
50
75
100
125
150
175
200
225
250
0 100 200 300 400 500 600 700 800 900
0
4
8
12
16
0 500 1000 1500 2000 2500 3000
Nozzle B Inlet
Pressure
N
ozzle A Inle
t
Pressure
Maximum Nozzle
Inlet Pressure
Maximum Monito
r
Inlet Pressure
Monitor
Loss
Nozzle C Inlet
Pressure
Tornado OSC Operating Envelope
Flow (gpm)
Monitor Inlet Pressure (psi)
Flow (lpm)
Monitor Inlet Pressure (bar)
0
25
50
75
100
125
150
175
200
225
250
0 100 200 300 400 500 600 700 800 900
0
4
8
12
16
0 500 1000 1500 2000 2500 3000
N
ozzle B Inle
t
Pressure
Nozzle A Inlet
Pressure
Maximum Nozzle
Inlet Pressure
M
aximum Monito
r
Inlet Pressure
Monitor
Loss
Nozzle C Inlet
Pressure

TFT Tornado RC Specifications

General

Brand	TFT
Model	Tornado RC
Category	Firefighting Equipment
Language	English