64
3-7-6 Clutch housing
-Inspect for any unusual damage and color
change.
-Replaced if the inside diameter exceeds
125.5mm.
3-7-7 Driven pulley
-Remove the central nut with compass
spanner to lock the driven pulley.
-Warning: Press tightly the driven pulley while
unscrewing the nut, so that the spring will
not jump out.
3-7-8 Retaining sheet
-Pull out the retaining sheet by hand
-Pull out the guide pins and extract the
movable drive face from the fixed driven face
To Next Page
Loading...
