Page 12 of 21
9 CD or CD+G Operation
This unit is designed to play CDs and CD+G’s bearing the identification logo
respectively. If the disc does not conform to the standard, it may not play properly.
9.1 Turning Power On/Off
• To turn on the unit, press the ON/OFF button, the ON/OFF LED Indicator will light
up.
• To turn it off, press the ON/OFF button again, the ON/OFF LED Indicator will turn
off
9.2 Loading a Disc
• Open the CD door, place a CD or CD+G disc in the compartment with the printed
side facing upward and the shiny side facing down.
• Gently close the CD door. The unit will start to play the first track automatically. (If
no disc is loaded, it will display “
”. If a CDG is loaded, the CDG indicator will
light up.)
Note: - Never place anything except a compact disc in the disc tray. Foreign objects
can damage the unit.
- Only place one disc on the disc tray at a time.
(Refer to the Trouble Shooting Guide if a disc is loaded but the total tracks do not
appear.)
9.3 Play/Pause
• Adjust MASTER VOLUME control on your unit, TV or audio system to a
comfortable level.
• To start playing, press the PLAY/PAUSE button. The first track [
] and the
PLAY/PAUSE LED will be lit.
• To temporarily stop playing, press the PLAY/PAUSE button. The PLAY/PAUSE
LED Indicator will flash.
• To resume play, press this button again.
Note: Pressing pause repeatedly when a CD+G is playing may cause distorted
lyrics on your TV screen. Any distortion will remain on the TV screen until it is
refreshed either during an instrumental break or the song is stopped and/or the
song is started from the beginning.
To Next Page
Loading...
