Theben KNX Series User Manual

The application programmes RAMSES 718 P/S
RAMSES 718 P / RAMSES 718 S 41
4.6.3 Operating Mode
Designation
Values
Description
Operating mode after reset
Frost protection
Temperature reduction
at night
Standby
Comfort
Operating mode after start-up or
reprogramming
Objects for determining the
operating mode
New: Operating mode,
presence, window
status
The operating mode is changed
depending on the window and
presence contacts.
Old: comfort, night,
frost
Traditional setting without
window and presence status.
 As long as the frost
protection object is = 1, no
other operating mode can
be selected.
Type of presence sensor
Only for objects for determining
the operating mode = new..
The presence sensor activates
comfort operating mode.
Presence detectors
Operating type comfort provided
the presence object is set
14
.
14
Exception: if a window is opened (window object = 1), the room temperature controller
switches to frost protection mode

Theben KNX Series Specifications

General

Communication Protocol	KNX
Ambient Temperature	-5°C to +45°C
Storage Temperature	-25°C to +70°C
Protection Class	IP20
Relative Humidity	5% to 95%, non-condensing
Operating Voltage	24 V DC (via KNX bus)