UPS Settings
Item Description
UPS Monitoring Enable or disable UPS monitoring.
Manufacturer Choose the UPS manufacturer and model number
from the dropdowns.
Battery Status Current status of the UPS battery
Power Current status of the power being supplied to the
UPS
Seconds between power failure and
first notification
Delay between power failure and first notification
in seconds.
Seconds between subsequent power
failure notifications
Delay between subsequent notifications in
seconds.
Shutdown the system when the
battery charge is less than
Amount of UPS battery remaining before system
should auto-shutdown.
Apply Press Apply to save your changes.
For a list of supported UPS units, see Appendix E: UPS Compatibility List.
Wake-Up On Lan (WOL)
The N7700 has the ability to be awoken
from sleep mode via WAN port.
From the Status menu, choose the
WOL item, and the Wake-up On Lan
Configuration screen appears. From
here, you can Enable or Disable.
Wake-up On Lan Configuration
Item Description
WOL Servic Enable or Disable WOL service
Apply Click Apply to save changes.
Power Management
Using the N7700’s Power
Management, you can save energy
and money by scheduling the
N7700 to turn itself on and off
during certain times of the day.
From the Status menu, choose the
Power Mgmt item and the
Schedule Power On/Off screen
appears.
To designate a schedule for the
N7700 to turn on and off, first
enable the feature by checking the
Enable Schedule Power On/Off
checkbox.
Then, simply choose an on and off
26
To Next Page
Loading...
Need help?
General
