Adding Groups
1. On the Local Group Configuration screen, click on the Add button.
2. The Local Group Setting screen appears.
3. Enter a Group Name.
4. Enter a Group ID number. If left blank, the system will automatically
assign one.
5. Select users to be in this group from
the Users List by adding them to
the Members List using the <<
button.
6. Click the Apply button to save your
changes.
Modifying Groups
1. On the Local Group Configuration
screen, select a group name from
the list.
2. Press the Modify button to modify
the members in a group.
3. To add a user into a group, select
the user from the Users List, and
press the << button to move the user into the Members List.
4. To remove a user from a group, select the user from Members List, and
press the >> button.
5. Click the Apply button to save your changes.
Deleting Groups
1. On the Local Group Configuration screen, select a group name from the
list.
2. Press Delete to delete the group from the system.
Batch User and Group Creation
The N7700 can also add users and groups in
batch mode. This enables you to
conveniently add numerous users and
groups automatically by importing a simple
comma-separated plain text (*.txt) file.
From the Accounts menu, click Batch
Mgmt and the Batch Create Users and
Groups dialogue will appear. To import
your list of users and groups, follow these
steps:
52
1. Click Browse… to locate your
comma-separated text file.
The information in the text file
should follow this format:
[USERNAME], [PASSWORD], [GROUP]
To Next Page
Loading...
Need help?
General
